Blog

Fuel Pressure Regulators, Commonly Fail In One Of Two Ways

10/23/2023

All fuel-injected engines, have fuel pressure regulators, to maintain a regulated high-pressure level. Fuel pressure regulators, must keep the pressure constant, in order for all the components of the system to work properly. Consequently, if […]

Catalytic Converter – Failure Signs And Testing – Learn The Basics

10/17/2023

So, a catalytic converter, is a device used to reduce the emissions, from an internal combustion engine. Consequently, the catalytic converter works, by breaking down unburned gases, left over by the combustion process. But, requires […]

Pushrods On G.M. 3.1-3.4 Engines – This Is Where Length Matters

10/14/2023

Exhaust and Intake Pushrods, on G.M. 3.1 and 3.4 engines are different lengths. I know this is old but quite often we still see, bent pushrods and valves, when they are mixed up. Consequently, Exhaust […]

Engine Oil Pressure Warning – Possible Causes And Testing

10/13/2023

Suddenly, an engine oil pressure warning light or a low oil pressure reading, appears on your dash. At that point, the engine oil pressure warning, is the only thing you should be thinking about. Above […]