Blog

Mass Air Flow Sensor (MAF) - Function - Common Failure Signs

Mass Air Flow Sensor (MAF): Measuring Volume, Density, Temperature

02/20/2024

So, almost all newer vehicles on the road today, use a mass air flow sensor. The mass air flow sensor, measures the volume and density, of the air entering the engine. In addition, it also […]

Crankshaft – Camshaft Position Sensor – Testing The Easy Way

02/19/2024

When a Crankshaft – Camshaft Position Sensor goes BAD, your vehicle will not start. Distributorless Ignition Systems (DIS) require a Crankshaft Position Sensor (CKP), and sometimes a Camshaft Position Sensor (CMP). So, the main difference […]

No Spark – When Your Engine Cranks, But Has No Spark

02/16/2024

When your engine cranks, but fails to start, it could be, because of no spark. No spark, is one of the most common reasons, why your engine will not start. If your engine has no spark, […]

Engine Bottom End Parts: Know The Parts Inside Your Engine

02/13/2024

The engine bottom end, is by far the most important part of the engine. But, the engine bottom end, is not just one thing. Because, it is made up of, it’s own list of parts. […]

(EVAP) Evaporative Emission System – Function – Failure – Testing

02/11/2024

The function of the (EVAP) evaporative emission system, is to trap and store evaporative fuel emissions. Therefore, the (EVAP) evaporative emission system totally eliminates fuel vapors, as a source of air pollution. However, sealing the […]

Rear Main Rope Seal – Alternatives For Many Older Engines

02/09/2024

Firstly, using a rear main rope seal, is almost a thing of the past. And, has greatly diminished in use. So, the rear main rope seal worked well, in its time. Only, as long as […]

Position Sensors - Crankshaft and Camshaft - Major Failure Signs

Position Sensors: CKP, CMP, Function and Failure Symptoms

02/09/2024

The most important sensors, in any engine, are the crankshaft and camshaft position sensors. Modern computer controlled vehicles, must have the air and fuel ignited, at the proper time, in order to operate efficiently. Both, […]

Coolant Mixed With Oil – In The Lubrication System – Cleaning Tips

02/07/2024

Professional installers offer the following information on, cleaning coolant mixed with oil, in the lubrication system. However, the following information, applies only to certain situations. So, it is not applicable for all engines, that have […]

Bubble Test – Used In Conjunction, With A Cylinder Leak Down Test

02/06/2024

So, to determine the health of a head gasket, between two cylinders, try doing a bubble test. If you believe you have a leak, but just cannot find it, doing a bubble test may be […]

Fuel Pump Related No Start Problems – What Should You Check

02/04/2024

The fuel pump runs continuously while your engine is running, delivering high-pressure fuel, to the fuel rail and injectors. The fuel pump keeps cool by staying submerged in fuel, or else it would overheat. So, […]

ATV Tech Tips - If An ATV Repair Seems Overwhelming, Get Help

ATV Tech Tips: if an ATV Repair Seems Overwhelming, it Probably is

02/03/2024

ATV tech tips, to help you know when to turn an ATV repair project, over to a professional. Here are three situations, where it’s best to turn an ATV repair, over to an experienced, fair […]