valves : Page 2 : Danny's Engineportal

How To Do A Cylinder Leak Down Test – With Or Without A Tester

12/02/2025

Doing a cylinder leak down test, can tell you more about your engine than you think. Also, it can spot issues in specific areas, that other tests will not. So, a cylinder leak down test, […]

Valve Guide Wear – How to Identify and Reduce Oil Consumption

10/25/2025

Valve guide wear, refers to excessive clearance, between valve stem and guide. As the guide wears, the side to side movement, can cause valves to seat improperly. As a result, requiring you to need a […]

Timing Belt Basics – Avoid the Unexpected Cost of Engine Damage

10/14/2025

A timing belt is one of those things that’s critical to replace; according to the auto manufacturer’s schedule. Timing belt replacement is most often between every 75,000 and 100,000 miles. So, check your owner’s manual […]

Pushrods On G.M. 3.1-3.4 Engines – This Is Where Length Matters

09/26/2025

Exhaust and Intake Pushrods, on G.M. 3.1 and 3.4 engines are different lengths. So, quite often we still see bent push rods and valves, when they are mixed up. Consequently, Exhaust pushrods on G.M. 3.1 […]