oil consumption

Close-up of performance engine camshaft and flat-tappet lifters being lubricated with high-zinc engine oil.

Low Zinc Engine Oil Guide: How to Protect Flat Tappet Cams

03/31/2026

The Problem with Modern Low-Zinc Oils: Is Your Engine at Risk? For decades, “zinc” was synonymous with engine health. But if you’ve walked down the oil aisle lately, you might have noticed a shift. Modern —READ-MORE

Worn Piston Rings: A Guide to Blow-by and Installation

02/19/2026

What are the First Signs of Worn Piston Rings? The most common indicator of internal engine wear is engine blow-by. This occurs when the seal between the piston and the cylinder wall fails. If you —READ-MORE

Engine Damage – Look for Deterioration, Before It’s Too Late

02/06/2026

It’s not always easy to recognize, when your vehicle is suffering from possible engine damage. Many symptoms can be overlooked and seen as “normal.” engine damage While not all symptoms may threaten the life of —READ-MORE

Valve Guide Wear – How to Identify and Reduce Oil Consumption

10/25/2025

Valve guide wear, refers to excessive clearance, between valve stem and guide. As the guide wears, the side to side movement, can cause valves to seat improperly. As a result, requiring you to need a —READ-MORE

Engine Rebuild Reasons – Low Compression And Oil Consumption

08/29/2025

So, the most common reasons to do a engine rebuild are, loss of compression and or excessive engine oil consumption. Consequently, what’s important now, is to recognize the signs of trouble, before you end up —READ-MORE

Engine Sludge – Causes and Prevention Tips

05/25/2025

Engine sludge forms, as the engine oil oxidizes and breaks down. During oxidation the oil combines with dirt, fuel, metal particles, water, gases, and coolant. As a result, leaving behind deposits, recognized as engine sludge. —READ-MORE

Valve Stem Seal Failure: Follow The Symptoms and Conditions

04/04/2025

The purpose of the valve stem seal, is to prevent the oil from the cylinder head, entering the combustion chamber. So, the valve stem seal, plays a critical role in controlling valve lubrication, as well —READ-MORE

Oil Consumption Has Many Causes, But, Worn Bearings Add To It

03/31/2025

Oil consumption is something nobody wants. But, worn engine bearings can make it even worse ? Engine oil consumption past rings, will only get worse, when engine bearings begin to wear out. So, oil consumption —READ-MORE

Fuel Getting Into Engine Oil: Learn The Cause, Effect And The Fix

03/20/2025

First, fuel getting into engine oil is bad. Because, it lowers the lubricating qualities of the oil. And, it lowers the engine oil viscosity, causing the oil to thin out to a dangerous level. Above —READ-MORE

Fuel Wash: What is it – Check If You Have It – Common Causes

03/03/2025

There is a condition, that adds to many engine failures, generally referred to as, “fuel wash”. Above all, there is only thing protecting your cylinder walls and bearings, from fuel wash. Consequently, that is, the —READ-MORE