Repair Tips - Take The Scare Out Of Basic Automotive Engine Repair
Repair Tips – Take The Scare Out Of Basic Automotive Engine Repair

Choose Your DannysEnginePortal.com Help Topic Below

Broken Bolt – Stud Removing – Repair Tips To Save You Time And Money

Top Dead Center (TDC) When The Piston Is At The Top Of Its Stroke

Auto Repair Basics – If You Drive A Car, You Should Learn Basic Repairs

Interference Or Non Interference Engine – What Is The Real Difference

Intermittent Temperature Related Engine Problems – Where To Start !

Diagnosis Engine Problems With Your Sight, Hearing, Touch And Smell

Oil Mixed With Coolant In The Cooling System – Cleaning Tips

Coolant Mixed With Oil In The Lubrication System – Cleaning Tips

Automatic Shutdown (ASD) Relay – Function – Failure – Testing

Valve Lash – Getting All The Facts For Setting And Adjustment

Emission Thermactor Plugs – Needed For Small Block Ford Cylinder Heads

GM 6.6L Duramax Diesel – How To Choose The Correct Head Gasket

Rear Main Rope Seal – There Are Alternatives For Many Older Engines

Water Pump Timing Belt Replacement – Basic Tips And Instructions

Automatic Belt Tensioner – Function – Failure Symptoms – Tensioner Testing


Repair Tips – Take The Scare Out Of Basic Automotive Engine Repair

So, Automotive engine repair can be very scary and frustrating, for almost any repair. Consequently, Without the right knowhow and resources, It’s like trying to find an address without a map. Many vehicle problems can be solved with a, basic understanding of auto maintenance and repair.

It’s always worth trying to figure out what’s wrong with your car or truck. If you’re able to pinpoint the problem, then you can decide whether you should repair it yourself. No matter what kind of vehicle problem you are struggling with, there is always a safe way to start.

One Of The Best Repairs Tips, And The First Thing To Do Is, Gather All Details Of Your Vehicle Problem

Important questions to ask yourself when troubleshooting and diagnosing vehicle problems:

  • When did it the problem happen?
  • Is the problem persistent or intermittent (happens from time to time only)
  • Was I doing anything with the vehicle when the problem emerged?
  • Is my vehicle running too hot?
  • Does the problem only happen when I’m going around a corner?
  • Is my check engine light on? If yes, what is the trouble code?
  • Have I maintained or repaired my vehicle recently?
  • Has a similar problem happened before?

Test drive your car and listen carefully for any problems,especially during starting and stopping. If your car won’t start, then you need to ask yourself:

  • Did anything happen right before the car stalled?
  • Has the car been taking longer than normal to start?
  • Does the car seem to “turn over” normally?

Write down every detail that comes up during troubleshooting. Look for similar symptoms listed in your repair manual and online auto forums.

Even if you can’t figure out the problem, the details will help your mechanic.


There Are Repair Tips For Almost Anything, All You Have To Do Is Look

Use Vacuum Hose / Fuel line / Heater core line to grip spark plugs. And, Then start them in tight or hard to reach spaces.

Basically, this tip will save you a lot of frustration and time. By, allowing you to start hard to reach spark plugs by hand, easily. To install spark plugs, you will need some hose that you can slip over the spark plug. Then cut it to whatever size you like. Start the plug by twisting the hose in your hand. Remove the hose once the plug is started. Consequently, Now you can place your socket on the plug, and do a final tightening.

The best way to start spark plugs in any car is by hand. It can be hard to get your hands, or the socket in tight places. Many times the plug is way down at a crazy angle.

By using vacuum line, you can get it started at any angle. It is easy while doing this to make sure you aren’t cross threading the spark plug. Everything about doing hard to reach spark plugs this way is easier than when using a socket and extension.

Please Share DannysEnginePortal.com News