So, A Coolant leak can occur anywhere in the cooling system.

Nine out of ten times, coolant leaks are easy to find because the coolant can be seen, Dripping, Spraying, Seeping, Or just bubbling.

Choose Your Coolant Leaks Help Topic Below

Antifreeze-Coolant – What Are The Basics You Really Need To Know

Engine Coolant Leak – How To Find Them – How Bad Are They

GM 3100 – 3400 Engine – Issues With Head, Manifold Leaks, Rocker Bolts

Antifreeze In Oil – Can Be Catastrophic If Not Dealt With Quickly

Intake Manifold – Gasket Leaks Spell Trouble For Your Engine

What Is That Fluid Leak Under My Car

Cylinder Head Cracking-What Can Cause It ?

Antifreeze-What Does It Do ? – Why Do You Need It ?

White Stuff Under My Oil Cap – What Is It ? Is It Bad ?

Coolant Recovery Tank – No Tank – Overflow Tank – Expansion Tank

When refilling the cooling system after making a repair, always use a 50/50 mixture of antifreeze and water.

Never use straight water because it has no freezing protection, no corrosion protection and it boils at a lower temperature (212 degrees F.) than a mixture of antifreeze and water (which protects to 240 degrees F.).

The best way to refill the system is to add coolant until the radiator is within an inch of being full. Also add coolant to the coolant reservoir, filling it to the proper level. If the system has a pressurized coolant reservoir, add coolant until the level inside the reservoir is at the COLD FULL mark. Start the engine and let it idle with the radiator or coolant reservoir cap off until the thermostat opens and coolant starts to circulate through the engine. The heater should also be on so coolant will flow through the heater core. As the coolant level drops, continue to add coolant until the system takes no more. Then replace the radiator cap and drive a short distance. Shut the engine off, and after it has cooled recheck the coolant level once again. If low, add as needed.

Please Share News

Thank You !!