Engine Rebuilding - What You Need To Know Before You Start
Engine Rebuilding – What You Need To Know Before You Start

Assuming the original engine is rebuildable and the amount of machine work required to restore it is minimal. Most of the savings comes from the labor you put into tearing down the engine and then reassembling it.

Choose Your Help Topic Below

Engine rebuilding remanufacturing FAQ

Zinc Additives – They Are Needed For Flat Tappet Lifter Break-In

Should I rebuild my engine FAQ

Valve Seats – Learning How to Install And Grind Them

Rear Main Rope Seal Alternatives

Cylinder head resurfacing- What you need to know

Valve guide wear-What to fix and why?

Ball Hone – How To Get The Perfect Finish For Piston Ring Sealing

Torque Specifications – Not Knowing Is Just Asking For Failure

In case you’re considering an engine rebuild, you need to make sure you evaluate your car to see if it’s worth it. However, it is always a personal choice.

While when you have a more than 20 year old car with over 300,000 miles, this can be an easier choice, if the car is 10 years and has 200,000 miles it can be a lot harder to know if it is worth to do an engine rebuild.

Rebuilding a damaged engine may be a more economical option than full replacement.

So, With engine rebuilding, you know everything has been closely inspected and it has many new parts. Also, It will extend the length of life for the engine. How long it will last depends on how many components were replaced. Another benefit is that you are recycling engine parts to help reduce the amount of scrap in the environment.